Add release date for 1.1.4

change fails on a Unix socket because it hasn't been created yet (libmilter
   will do this correctly on its own based on umask, the milter doesn't need
   to do it) (LP: #1849712)

CHANGES

@@ -1,5 +1,38 @@
+1.1.4 2019-11-22
+ - Make error logging more explicit to aid debugging
+ - Delete own_socketfile to resolve race condition where the permissions
+   change fails on a Unix socket because it hasn't been created yet (libmilter
+   will do this correctly on its own based on umask, the milter doesn't need
+   to do it) (LP: #1849712)
+
+1.1.3 2019-10-06
+ - Fix sysv init so it works (LP: #1839487)
+
+1.1.2 2019-09-23
+ - Fix variable initialization so mailformed mails missing body From do not
+   cause a traceback (LP: #1844161)
+ - Catch more ascii encoding errors to improve resilience against bad data
+   (LP: #1844189)
+
+1.1.1 2019-09-06
+ - Fix startup logging so it provides information at a useful time
+ - Fix verify processing so missing (optional) i= tag doesn't cause the milter
+   to fail (LP: #1842250)
+ - Fix message extraction so that signing in the same pass through the milter
+   as verifying works correctly
+
+1.1.0 2019-04-12
+ - Add SubDomains option to enable signing for sub-domains (LP: #1811535)
+ - Port to python3 (LP: #1815502)
+ - Add test suite using opendkim miltertest
+ - When Socket is absolute path, do not strip leading /
+ - Handle unix: socket prefix the same as local:
+ - Set up correct AuthservID defaults
+ - config: Reassemble strings sensibly
+ - Consistently prefer dnspython to Py3DNS (LP: #1815558)
+
 1.0.1 2019-02-11
- * Reorder milter start and dropping privileges so permissions on Unix socket
+ - Reorder milter start and dropping privileges so permissions on Unix socket
    are correct (LP: 1797720)
  - Make domain checks case insensitive for determining if signing should be
    done (LP: #1815311)

README

@@ -17,13 +17,13 @@ to be installed when installing using setup.py, the following incantation is
 required because setuptools developers decided not being able to do this by
 default is a feature:
 
-python setup.py install --single-version-externally-managed --record=/dev/null
+python3 setup.py install --single-version-externally-managed --record=/dev/null
 
 For users of Debian Stable (Debian 9, Codename Squeeze), all dependencies are
 available in either the main or backports repositories:
 
-[sudo] apt install python-milter python-nacl python-ipaddress python-dnspython
+[sudo] apt install python3-milter python3-nacl python3-dnspython
-[sudo] apt install -t stretch-backports python-authres python-dkim
+[sudo] apt install -t stretch-backports python3-authres python3-dkim
 
 The preferred method of installation is from PyPi using pip (if distribution
 packages are not available):
@@ -33,11 +33,11 @@ packages are not available):
 Using pip will cause required packages to be installed via easy_install if they
 have not been previously installed.  Because pymilter and PyNaCl are compiled
 Python extensions, the system will need appropriate development packages and
-an C compiler.  Alternately, install these dependencies from dsitribution/OS
+an C compiler.  Alternately, install these dependencies from distribution/OS
 packages and then pip install dkimpy_milter.
 
-The milter will work with either pydns (DNS) or dnspython (dns), preferring
+The milter will work with either py3dns (DNS) or dnspython (dns), preferring
-dnspython is both are available.  The dkimpy DKIM module also works with
+dnspython if both are available.  The dkimpy DKIM module also works with
 either.
 
 
@@ -84,9 +84,8 @@ MTA INTEGRATION
 
 Both a systemd unit file and a sysv init file are provided.  Both make
 assumptions about defaults being used, e.g. if a non-standard pidfile name is
-used, they will need to be updated.  The sysv init file is Debian specific and
+used, they will need to be updated.  The sysv init file uses start-stop-deamon
-untested, since the developers are not using sysv init.  Feedback/patches
+from Debian.  It is not portable to systems without that available.
-welcome.
 
 The dkimpy-milter drops priviledges after setup to the user/group specified in
 UserID.  During initial setup, this system user needs to be manually created.
@@ -94,7 +93,7 @@ As an example, using the default dkimpy-user on Debian, the command would be:
 
 [sudo] adduser --system --no-create-home --quiet --disabled-password \
                --disabled-login --shell /bin/false --group \
-               --home /var/run/dkimpy-milter dkimpy-milter
+               --home /run/dkimpy-milter dkimpy-milter
 
 Since /var/run or /run is sometimes on a tempfs, if the PID file directory is
 missing, the milter will create it on startup.
@@ -117,7 +116,7 @@ Configuration is very similar to opendkim, but needs some adjustment for
 dkimpy-milter. Here's an example configuration line to include in your
 sendmail.mc:
 
-INPUT_MAIL_FILTER(`dkimpy-milter', `S=local:/var/run/dkimpy-milter/dkimpy-milter.sock')dnl
+INPUT_MAIL_FILTER(`dkimpy-milter', `S=local:/run/dkimpy-milter/dkimpy-milter.sock')dnl
 
 Changing the sendmail.mc file requires a Make (to compile it into sendmail.cf)
 and a restart of sendmail.  Note that S= needs to match the value of Socket in

TODO

@@ -44,15 +44,20 @@ No additional features
 1.0.1
 Bug fix only, improved documentation
 
-1.1.0 (planned)
+1.1.0
-Port to Python 3
+Port to Python 3  implemented	verified
-Subdomain support
+Subdomain support implemented	verified
+Test suite	  implemented	verified
 
 Planned dataset type support (if needed):
 mdb:
 
 Considered for near-term feature release
 
+KeyTable
+KeytableEd25519
+SigningTable
+SigningTableEd25519
 AlwaysAddARHeader
 ChangeRootDirectory
 ClockDrift (requires dkimpy change)
@@ -73,8 +78,6 @@ ExternalIgnoreList
 FixCRLF
 KeepAuthResults
 KeepTemporaryFiles
-KeyTable
-KeytableEd25519
 LogResults
 LogWhy
 MaximumHeaders
@@ -98,7 +101,6 @@ RequireSafeKeys
 SignatureAlgorithm
 SignatureTTL
 SignHeaders
-SigningTable
 SoftwareHeader
 StrictHeaders
 SubDomains

dkimpy_milter/__init__.py

@@ -1,4 +1,4 @@
-#! /usr/bin/python2
+#! /usr/bin/python3
 # Original dkim-milter.py code:
 # Author: Stuart D. Gathman <stuart@bmsi.com>
 # Copyright 2007 Business Management Systems, Inc.
@@ -28,15 +28,15 @@ import dkim
 import authres
 import os
 import tempfile
-import StringIO
+import io
 import re
+import codecs
 from Milter.utils import parse_addr, parseaddr
 import dkimpy_milter.config as config
 from dkimpy_milter.util import drop_privileges
 from dkimpy_milter.util import setExceptHook
 from dkimpy_milter.util import write_pid
 from dkimpy_milter.util import read_keyfile
-from dkimpy_milter.util import own_socketfile
 from dkimpy_milter.util import fold
 
 __version__ = "1.0.1"
@@ -54,6 +54,7 @@ class dkimMilter(Milter.Base):
         self.privatersa = privateRSA
         self.privateed25519 = privateEd25519
         self.fp = None
+        self.fdomain = ''
 
     @Milter.noreply
     def connect(self, hostname, unused, hostaddr):
@@ -110,7 +111,7 @@ class dkimMilter(Milter.Base):
     def envfrom(self, f, *str):
         if milterconfig.get('Syslog') and milterconfig.get('debugLevel') >= 2:
             syslog.syslog("mail from: {0} {1}".format(f, str))
-        self.fp = StringIO.StringIO()
+        self.fp = io.BytesIO()
         self.mailfrom = f
         t = parse_addr(f)
         if len(t) == 2:
@@ -135,20 +136,24 @@ class dkimMilter(Milter.Base):
             try:
                 self.fdomain = self.author.split('@')[1].lower()
             except IndexError as er:
-                self.fdomain = ''  # self.author was not a proper email address
+                pass # self.author was not a proper email address
             if (milterconfig.get('Syslog') and
                     milterconfig.get('debugLevel') >= 1):
                 syslog.syslog("{0}: {1}".format(name, val))
         elif lname == 'authentication-results':
             self.arheaders.append(val)
         if self.fp:
-            self.fp.write("%s: %s\n" % (name, val))
+            try:
+                self.fp.write(b"%s: %s\n" % (codecs.encode(name, 'ascii'), codecs.encode(val, 'ascii')))
+            except:
+                # Don't choke on header fields with non-ascii garbage in them.
+                pass
         return Milter.CONTINUE
 
     @Milter.noreply
     def eoh(self):
         if self.fp:
-            self.fp.write("\n")   # terminate headers
+            self.fp.write(b"\n")   # terminate headers
         self.bodysize = 0
         return Milter.CONTINUE
 
@@ -176,39 +181,40 @@ class dkimMilter(Milter.Base):
             except:
                 # Don't error out on unparseable AR header fiels
                 pass
-        # Check or sign DKIM
+        # Check and/or sign DKIM
         self.fp.seek(0)
+        txt = self.fp.read()
         if milterconfig.get('Domain'):
             domain = milterconfig.get('Domain')
         else:
             domain = ''
+        if milterconfig.get('SubDomains'):
+            self.fdomain = _get_parent_domain(self.fdomain, domain)
         if ((self.fdomain in domain) and not milterconfig.get('Mode') == 'v'
                 and not self.external_connection):
-            txt = self.fp.read()
             self.sign_dkim(txt)
         if ((self.has_dkim) and (not self.internal_connection) and
             (milterconfig.get('Mode') == 'v' or
              milterconfig.get('Mode') == 'sv')):
-            txt = self.fp.read()
             self.check_dkim(txt)
         if self.arresults:
             h = authres.AuthenticationResultsHeader(authserv_id=
                                                     self.AuthservID,
                                                     results=self.arresults)
-            h = fold(str(h))
+            h = fold(codecs.encode(str(h), 'ascii'))
             if (milterconfig.get('Syslog') and
                     milterconfig.get('debugLevel') >= 2):
-                syslog.syslog(str(h))
+                syslog.syslog(codecs.decode(h, 'ascii'))
-            name, val = str(h).split(': ', 1)
+            name, val = codecs.decode(h, 'ascii').split(': ', 1)
             self.addheader(name, val, 0)
         return Milter.CONTINUE
 
     def sign_dkim(self, txt):
-        canon = milterconfig.get('Canonicalization')
+        canon = codecs.encode(milterconfig.get('Canonicalization'), 'ascii')
         canonicalize = []
-        if len(canon.split('/')) == 2:
+        if len(canon.split(b'/')) == 2:
-            canonicalize.append(canon.split('/')[0])
+            canonicalize.append(canon.split(b'/')[0])
-            canonicalize.append(canon.split('/')[1])
+            canonicalize.append(canon.split(b'/')[1])
         else:
             canonicalize.append(canon)
             canonicalize.append(canon)
@@ -218,35 +224,36 @@ class dkimMilter(Milter.Base):
         try:
             if privateRSA:
                 d = dkim.DKIM(txt)
-                h = d.sign(milterconfig.get('Selector'), self.fdomain,
+                h = d.sign(codecs.encode(milterconfig.get('Selector'), 'ascii'), codecs.encode(self.fdomain, 'ascii'),
-                           privateRSA, canonicalize=(canonicalize[0],
+                           codecs.encode(privateRSA, 'ascii'),
-                                                     canonicalize[1]))
+                           canonicalize=(canonicalize[0],
-                name, val = h.split(': ', 1)
+                                         canonicalize[1]))
-                self.addheader(name, val.strip().replace('\r\n', '\n'), 0)
+                name, val = h.split(b': ', 1)
+                self.addheader(codecs.decode(name, 'ascii'), codecs.decode(val, 'ascii').strip().replace('\r\n', '\n'), 0)
                 if (milterconfig.get('Syslog') and
                     (milterconfig.get('SyslogSuccess')
                      or milterconfig.get('debugLevel') >= 1)):
-                    syslog.syslog('{0}: {1} DKIM-Signature field added (s={2} '
+                    syslog.syslog('{0}: {1} DKIM signature added (s={2} '
                                   'd={3})'.format(self.getsymval('i'),
-                                                  d.signature_fields.get(b'a'),
+                                                  d.signature_fields.get(b'a').decode(),
-                                                  d.signature_fields.get(b's'),
+                                                  d.signature_fields.get(b's').decode(),
-                                                  d.domain.lower()))
+                                                  d.domain.decode().lower()))
             if privateEd25519:
                 d = dkim.DKIM(txt)
-                h = d.sign(milterconfig.get('SelectorEd25519'), self.fdomain,
+                h = d.sign(codecs.encode(milterconfig.get('SelectorEd25519'), 'ascii'), codecs.encode(self.fdomain, 'ascii'),
                            privateEd25519, canonicalize=(canonicalize[0],
                                                          canonicalize[1]),
-                           signature_algorithm='ed25519-sha256')
+                           signature_algorithm=b'ed25519-sha256')
-                name, val = h.split(': ', 1)
+                name, val = h.split(b': ', 1)
-                self.addheader(name, val.strip().replace('\r\n', '\n'), 0)
+                self.addheader(codecs.decode(name, 'ascii'), codecs.decode(val, 'ascii').strip().replace('\r\n', '\n'), 0)
                 if (milterconfig.get('Syslog') and
                     (milterconfig.get('SyslogSuccess')
                      or milterconfig.get('debugLevel') >= 1)):
-                    syslog.syslog('{0}: {1} DKIM-Signature field added (s={2} '
+                    syslog.syslog('{0}: {1} DKIM signature added (s={2} '
                                   'd={3})'.format(self.getsymval('i'),
-                                                  d.signature_fields.get(b'a'),
+                                                  d.signature_fields.get(b'a').decode(),
-                                                  d.signature_fields.get(b's'),
+                                                  d.signature_fields.get(b's').decode(),
-                                                  d.domain.lower()))
+                                                  d.domain.decode().lower()))
         except dkim.DKIMException as x:
             if milterconfig.get('Syslog'):
                 syslog.syslog('DKIM: {0}'.format(x))
@@ -257,6 +264,7 @@ class dkimMilter(Milter.Base):
 
     def check_dkim(self, txt):
         res = False
+        self.header_a = None
         for y in range(self.has_dkim):  # Verify _ALL_ the signatures
             d = dkim.DKIM(txt)
             try:
@@ -266,20 +274,17 @@ class dkimMilter(Milter.Base):
                     res = d.verify(idx=y, dnsfunc=lambda _x: dnsoverride)
                 else:
                     res = d.verify(idx=y)
+                algo = codecs.decode(d.signature_fields.get(b'a'), 'ascii')
                 if res:
-                    if d.signature_fields.get(b'a') == 'ed25519-sha256':
+                    if algo == 'ed25519-sha256':
                         self.dkim_comment = ('Good {0} signature'
-                                             .format(d.signature_fields
+                                             .format(algo))
-                                                     .get(b'a')))
                     else:
                         self.dkim_comment = ('Good {0} bit {1} signature'
-                                             .format(d.keysize,
+                                             .format(d.keysize, algo))
-                                                     d.signature_fields
-                                                     .get(b'a')))
                 else:
                     self.dkim_comment = ('Bad {0} bit {1} signature.'
-                                         .format(d.keysize,
+                                         .format(d.keysize, algo))
-                                                 d.signature_fields.get(b'a')))
             except dkim.DKIMException as x:
                 self.dkim_comment = str(x)
                 if milterconfig.get('Syslog'):
@@ -287,19 +292,31 @@ class dkimMilter(Milter.Base):
             except Exception as x:
                 self.dkim_comment = str(x)
                 if milterconfig.get('Syslog'):
-                    syslog.syslog("check_dkim: {0}".format(x))
+                    syslog.syslog("check_dkim: Internal program fault while verifying: {0}".format(x))
-            self.header_i = d.signature_fields.get(b'i')
+            try:
-            self.header_d = d.signature_fields.get(b'd')
+                # i= is optional and dkimpy is fine if it's not provided
-            self.header_a = d.signature_fields.get(b'a')
+                self.header_i = codecs.decode(d.signature_fields.get(b'i'), 'ascii')
+            except TypeError as x:
+                self.header_i = None
+            try:
+                self.header_d = codecs.decode(d.signature_fields.get(b'd'), 'ascii')
+                self.header_a = codecs.decode(d.signature_fields.get(b'a'), 'ascii')
+            except Exception as x:
+                self.dkim_comment = str(x)
+                if milterconfig.get('Syslog'):
+                    syslog.syslog("check_dkim: Internal proram fuault extracting header a or d: {0}".format(x))
+                self.header_d = None
+            if not self.header_a:
+                self.header_a = 'rsa-sha256'
             if res:
                 if (milterconfig.get('Syslog') and
                         (milterconfig.get('SyslogSuccess') or
                          milterconfig.get('debugLevel') >= 1)):
                     syslog.syslog('{0}: {1} DKIM signature verified (s={2} '
                                   'd={3})'.format(self.getsymval('i'),
-                                                  d.signature_fields.get(b'a'),
+                                                  d.signature_fields.get(b'a').decode(),
-                                                  d.signature_fields.get(b's'),
+                                                  d.signature_fields.get(b's').decode(),
-                                                  d.domain.lower()))
+                                                  d.domain.decode().lower()))
                 self.dkim_domain = d.domain.lower()
             else:
                 if milterconfig.get('DiagnosticDirectory'):
@@ -310,22 +327,39 @@ class dkimMilter(Milter.Base):
                         syslog.syslog('DKIM: Fail (saved as {0})'
                                       .format(fname))
                 else:
-                    syslog.syslog('DKIM: Fail ({0})'.format(d.domain.lower()))
+                    if milterconfig.get('Syslog'):
+                        if d.domain:
+                            syslog.syslog('DKIM: Fail ({0})'
+                                          .format(d.domain.lower()))
+                        else:
+                            syslog.syslog('DKIM: Fail, unextractable domain')
             if res:
                 result = 'pass'
             else:
                 result = 'fail'
             res = False
-            self.arresults.append(
+            if self.header_d:
-                authres.DKIMAuthenticationResult(result=result,
+                self.arresults.append(
+                    authres.DKIMAuthenticationResult(result=result,
                                                  header_i=self.header_i,
                                                  header_d=self.header_d,
                                                  header_a=self.header_a,
                                                  result_comment=
                                                  self.dkim_comment)
             )
+            self.header_a = None
         return
 
+# get parent domain to be signed for if fdomain is a subdomain
+def _get_parent_domain(fdomain, domains):
+    for domain in domains:
+        rhs = '.'+domain
+        # compare right hand side of fdomain against .domain
+        if fdomain[-len(rhs):] == rhs:
+            # return parent domain on match
+            return domain
+    # or return the fdomain itself
+    return fdomain
 
 def main():
     # Ugh, but there's no easy way around this.
@@ -355,13 +389,23 @@ def main():
     Milter.set_flags(Milter.CHGHDRS + Milter.ADDHDRS)
     miltername = 'dkimpy-filter'
     socketname = milterconfig.get('Socket')
-    own_socketfile(milterconfig)
+    if socketname is None:
+        if int(os.environ.get('LISTEN_PID', '0')) == os.getpid():
+            lfds = os.environ.get('LISTEN_FDS')
+            if lfds is not None:
+                if lfds != '1':
+                    syslog.syslog('LISTEN_FDS is set to "{0}", but we only know how to deal with "1", ignoring it'.
+                                  format(lfds))
+                else:
+                    socketname = 'fd:3'
+        if socketname is None:
+            socketname = 'local:/var/run/dkimpy-milter/dkimpy-milter.sock'
     drop_privileges(milterconfig)
     sys.stdout.flush()
-    Milter.runmilter(miltername, socketname, 240)
     if milterconfig.get('Syslog'):
-        syslog.syslog('dkimpy-milter started:{0} user:{1}'
+        syslog.syslog('dkimpy-milter starting:{0} user:{1}'
                       .format(pid, milterconfig.get('UserID')))
+    Milter.runmilter(miltername, socketname, 240)
 
 if __name__ == "__main__":
     main()

dkimpy_milter/__main__.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python2
+#!/usr/bin/python3
 
 from dkimpy_milter import main
 

dkimpy_milter/config.py

@@ -31,16 +31,16 @@ import stat
 import dkim
 import socket
 import ipaddress
-from dnsplug import Session
+from .dnsplug import Session
 
 #  default values
 defaultConfigData = {
     'Syslog': 'yes',
     'SyslogFacility': 'mail',
-    'UMask': 007,
+    'UMask': 0o07,
     'Mode': 'sv',
-    'Socket': 'local:/var/run/dkimpy-milter/dkimpy-milter.sock',
+    'Socket': None,
-    'PidFile': '/var/run/dkimpy-milter/dkimpy-milter.pid',
+    'PidFile': None,
     'UserID': 'dkimpy-milter',
     'Canonicalization': 'relaxed/simple',
     'InternalHosts': '127.0.0.1',
@@ -49,6 +49,7 @@ defaultConfigData = {
     'MacroList': '',
     'MacroListVerify': '',
     'DNSOverride': None,
+    'SubDomains': False,
     'debugLevel': 0  # Undocumented config item for developer use
     }
 
@@ -85,14 +86,14 @@ class HostsDataset(object):
                 self.item = item[1:]
                 self.negative = True
             try:
-                self.item = ipaddress.ip_address(unicode(self.item, "utf-8"))
+                self.item = ipaddress.ip_address(str(self.item, "utf-8"))
                 if isinstance(self.item, ipaddress.IPv4Address):
                     self.isipv4 = True
                 elif isinstance(self.item, ipaddress.IPv6Address):
                     self.isipv6 = True
             except ValueError as e:
                 try:
-                    self.item = ipaddress.ip_network(unicode
+                    self.item = ipaddress.ip_network(str
                                                      (self.item, "utf-8"),
                                                      strict=False)
                     if isinstance(self.item, ipaddress.IPv4Network):
@@ -110,7 +111,7 @@ class HostsDataset(object):
 
     def match(self, connectip):
         '''Check if the connect IP is part of the dataset'''
-        source = ipaddress.ip_address(unicode(connectip, "utf-8"))
+        source = ipaddress.ip_address(str(connectip, "utf-8"))
         for item in self.dataset:
             if item.isdomain or item.ishostname:
                 result = self.matchname(source)   # Match host/domains first
@@ -160,13 +161,13 @@ class HostsDataset(object):
             if isinstance(source, ipaddress.IPv4Address):
                 ips = s.dns(name, 'A')
                 for ip in ips:
-                    ip = ipaddress.IPv4Address(unicode(ip, 'UTF-8'))
+                    ip = ipaddress.IPv4Address(str(ip, 'UTF-8'))
                     if ip == source:
                         results.append(name)
             if isinstance(source, ipaddress.IPv6Address):
                 ips = s.dns(name, 'AAAA')
                 for ip in ips:
-                    ip = ipaddress.IPv6Address(unicode(ip, 'UTF-8'))
+                    ip = ipaddress.IPv6Address(str(ip, 'UTF-8'))
                 if ip == source:
                     results.append(name)
         return results
@@ -225,13 +226,13 @@ def _processConfigFile(filename=None, configdata=None, useSyslog=1,
     '''Load the specified config file, exit and log errors if it fails,
     otherwise return a config dictionary.'''
 
-    import config
+    from . import config
     if configdata is None:
         configdata = config.defaultConfigData
     if filename is not None:
         try:
             _readConfigFile(filename, configdata)
-        except Exception, e:
+        except Exception as e:
             raise
             if useSyslog:
                 syslog.syslog(e.args[0])
@@ -309,7 +310,9 @@ def _readConfigFile(path, configData=None, configGlobal={}):
     dictionary of name/value pairs based on configData and the values
     read from path.'''
 
-    debugLevel = configGlobal.get('debugLevel', 0)
+    # No config file data is available yet, so to debug _readConfigFile, set
+    # the value here.
+    debugLevel = 0
     if debugLevel >= 5:
         syslog.syslog('readConfigFile: Loading "%s"' % path)
     if configData is None:
@@ -325,6 +328,7 @@ def _readConfigFile(path, configData=None, configGlobal={}):
         'PidFile': 'str',
         'UserID': 'str',
         'Domain': 'dataset',
+        'SubDomains': 'bool',
         'KeyFile': 'str',
         'KeyFileEd25519': 'str',
         'Selector': 'str',
@@ -342,7 +346,7 @@ def _readConfigFile(path, configData=None, configGlobal={}):
     #  check to see if it's a file
     try:
         mode = os.stat(path)[0]
-    except OSError, e:
+    except OSError as e:
         syslog.syslog(syslog.LOG_ERR, 'ERROR stating "%s": %s'
                       % (path, e.strerror))
         return(configData)
@@ -378,9 +382,15 @@ def _readConfigFile(path, configData=None, configGlobal={}):
             value = data[1:]
 
         #  check validity of name
-        conversion = nameConversion.get(name)
+        try:
+            conversion = nameConversion.get(name)
+        except TypeError:
+            name = name[0]
+            syslog.syslog('Config item "%s" does not provide a value in file "%s"'
+                          % (name, path))
+            conversion = None
         if conversion is None:
-            syslog.syslog('ERROR: Unknown name "%s" in file "%s"'
+            syslog.syslog('ERROR: Unknown name or name missing value "%s" in file "%s"'
                           % (name, path))
             continue
 

dkimpy_milter/dnsplug.py

@@ -84,7 +84,7 @@ class Session(object):
             raise DNSError('Length of CNAME chain exceeds %d' % MAX_CNAME)
         cnames[name] = cname
         if cname in cnames:
-            raise DNSError, 'CNAME loop'
+            raise DNSError('CNAME loop')
         result = self.dns(cname, qtype, cnames=cnames)
     return result
 
@@ -103,16 +103,16 @@ def DNSLookup_pydns(name, qtype, tcpfallback=True, timeout=30):
         #
         if resp.header['tc'] == True:
           if not tcpfallback:
-              raise DNS.DNSError, 'DNS: Truncated UDP Reply, SPF records should fit in a UDP packet'
+              raise DNS.DNSError('DNS: Truncated UDP Reply, SPF records should fit in a UDP packet')
           try:
               req = DNS.DnsRequest(name, qtype=qtype, protocol='tcp',
                         timeout=timeout)
               resp = req.req()
-          except DNS.DNSError, x:
+          except DNS.DNSError as x:
-              raise DNS.DNSError, 'TCP Fallback error: ' + str(x)
+              raise DNS.DNSError('TCP Fallback error: ' + str(x))
         return [((a['name'], a['typename']), a['data']) for a in resp.answers]
-    except IOError, x:
+    except IOError as x:
-        raise DNS.DNSError, 'DNS: ' + str(x)
+        raise DNS.DNSError('DNS: ' + str(x))
 
 def DNSLookup_dnspython(name,qtype,tcpfallback=True,timeout=30):
   retVal = []
@@ -164,5 +164,5 @@ if __name__ == '__main__':
   import sys
   s = Session()
   for n,t in zip(*[iter(sys.argv[1:])]*2):
-    print n,t
+    print(n,t)
-    print s.dns(n,t)
+    print(s.dns(n,t))

dkimpy_milter/util.py

@@ -115,55 +115,40 @@ def write_pid(milterconfig):
     """Write PID in pidfile.  Will not overwrite an existing file."""
     import os
     import syslog
-    if not os.path.isfile(milterconfig.get('PidFile')):
+    pidfile = milterconfig.get('PidFile')
+    if pidfile is None:
+        return
+    if not os.path.isfile(pidfile):
         pid = str(os.getpid())
         try:
-            f = open(milterconfig.get('PidFile'), 'w')
+            f = open(pidfile, 'w')
         except IOError as e:
             if str(e)[:35] == '[Errno 2] No such file or directory':
-                piddir = milterconfig.get('PidFile').rsplit('/', 1)[0]
+                piddir = pidfile.rsplit('/', 1)[0]
                 os.mkdir(piddir)
                 user, group = user_group(milterconfig.get('UserID'))
                 os.chown(piddir, user, group)
-                f = open(milterconfig.get('PidFile'), 'w')
+                f = open(pidfile, 'w')
                 if milterconfig.get('Syslog'):
                     syslog.syslog('PID dir created: {0}'.format(piddir))
             else:
                 if milterconfig.get('Syslog'):
                     syslog.syslog('Unable to write pidfle {0}.  IOError: {1}'
-                                  .format(milterconfig.get('PidFile'), e))
+                                  .format(pidfile, e))
                 raise
         f.write(pid)
         f.close()
         user, group = user_group(milterconfig.get('UserID'))
-        os.chown(milterconfig.get('PidFile'), user, group)
+        os.chown(pidfile, user, group)
     else:
         if milterconfig.get('Syslog'):
             syslog.syslog('Unable to write pidfle {0}.  File exists.'
-                          .format(milterconfig.get('PidFile')))
+                          .format(pidfile))
         raise RuntimeError('Unable to write pidfle {0}.  File exists.'
-                           .format(milterconfig.get('PidFile')))
+                           .format(pidfile))
     return pid
 
 
-def own_socketfile(milterconfig):
-    """If socket is Unix socket, chown to UserID before dropping privileges"""
-    import os
-    user, group = user_group(milterconfig.get('UserID'))
-    offset = None
-    sockname = milterconfig.get('Socket')
-    if sockname[:1] == '/':
-        offset = 0
-    elif sockname[:6] == "local:":
-        offset = 6
-    elif sockname[:5] == "unix:":
-        offset = 5
-
-    if offset is not None:
-        if os.path.exists(sockname[offset:]):
-            os.chown(sockname[offset:], user, group)
-
-
 def read_keyfile(milterconfig, keytype):
     """Read private key from file."""
     import syslog
@@ -184,3 +169,26 @@ def read_keyfile(milterconfig, keytype):
     for line in keylist:
         key += line
     return key
+
+def read_keytable(milterconfig, tabletype):
+    """Read keytables into in memory configuration data so all keys are read
+    before priviledges are dropped."""
+    import syslog
+    if tabletype == "RSA":
+        tablefile = milterconfig.get('KeyTable')
+    if tabletype == "Ed25519":
+        tablefile = milterconfig.get('KeyTableEd25519')
+    if milterconfig.get(tablefile):
+        keytabledata = []
+        try:
+            f = open(milterconfig.get(tablefile))
+            for row in f:
+                keytabledata.append(row) 
+            f.close()
+        except IOError as e:
+            if milterconfig.get('Syslog'):
+                syslog.syslog('Unable to read keytable {0}.  IOError: {1}'
+                              .format(tablefile, e))
+            raise
+        
+    return keytabledata

etc/dkimpy-milter.conf

@@ -38,7 +38,7 @@ Socket			inet:8892@localhost
 ###  Name of the file where the filter should write its pid before beginning
 ###  normal operations.
 #
-PidFile			/var/run/dkimpy-milter/dkimpy-milter.pid
+PidFile			/run/dkimpy-milter/dkimpy-milter.pid
 
 ##  Userid userid
 ###      default dkimpy-milter

man/dkimpy-milter.conf.5

@@ -131,7 +131,7 @@
 .SH "NAME"
 dkimpy-milter \- Python milter for DKIM signing and validation
 .SH "VERSION"
-0\.9\.2
+1\.1\.0
 
 .SH "DESCRIPTION"
 .I dkimpy-milter(8)
@@ -221,12 +221,16 @@ domains will be verified rather than being signed.
 
 This parameter is not required if a
 .I SigningTable
+or
+.I SigningTableEd25519
 is in use; in that case, the list of signed domains is implied by the
-lines in that file. [SigningTable NOT IMPLEMENTED]
+lines in that file.
 
 This parameter is ignored if a
 .I KeyTable
-is defined. [KeyTable NOT IMPLEMENTED]
+or
+.I KeyTableD25119
+is defined.
 
 .TP
 .I InternalHosts (dataset)
@@ -244,7 +248,7 @@ address explicitly. [PeerList NOT IMPLEMENTED]
 Gives the location of a PEM-formatted private key to be used for RSA signing
 all messages.  Ignored if a
 .I KeyTable
-is defined. [KeyTable NOT IMPLEMENTED]
+is defined.
 
 .TP
 .I KeyFileEd25519 (string)
@@ -252,7 +256,17 @@ Gives the location of a Ed25519 private key to be used for Ed25519 signing
 all messages.  File is the Base64 encoded output of RFC 8032 Ed25519 private Key
 generation (as used in dkimpy).  Ignored if a 
 .I KeyTableEd25519
-is defined.  [KeyTableEd25519 NOT IMPLEMENTED]
+is defined.
+
+.TP
+.I KeyTable (dataset)
+Gives the location of a file mapping key names to RSA signing keys. If present, overrides any KeyFile setting in the configuration file. The data set named here maps each key name to three values: (a) the name of the domain to use in the signature’s "d=" value; (b) the name of the selector to use in the signature’s "s=" value; and (c) the  path to a file containing a private key. If the first value consists solely of a percent sign ("%") character, it will be replaced by the apparent domain of the sender when generating a signature. The third value must start with a slash ("/") character, or "./" or "../" to indicate it refers to a file from which the private key should be read.  The SigningTable (see below) is used to select records from this table to be used to add signatures based on the message sender.  NOTE: direct specification of keys in the table as is done by OpenDKIM is not supported.
+
+.TP
+.I KeyTableEd25519 (dataset)
+Gives the location of a file mapping key names to Ed25519 signing keys. If present, overrides any KeyFile setting in the configuration file. The data set named here maps each key name to three values: (a) the name of the domain to use in the signature’s "d=" value; (b) the name of the selector to use in the signature’s "s=" value; and (c) the  path to a file containing a private key. If the first value consists solely of a percent sign ("%") character, it will be replaced by the apparent domain of the sender when generating a signature. The third value must start with a slash ("/") character, or "./" or "../" to indicate it refers to a file from which the private key should be read.  The SigningTable (see below) is used to select records from this table to be used to add signatures based on the message sender.  NOTE: direct specification of keys in the table as is done by OpenDKIM is not support
+ed.
+
 
 .TP
 .I MacroList (dataset)
@@ -309,7 +323,6 @@ When signing mode is enabled, one of the following combinations must also
 be set:
 (a) Domain, KeyFile, Selector, no KeyTable, no SigningTable;
 (b) KeyTable, SigningTable, no Domain, no KeyFile, no Selector;
-[fooTable options NOT IMPLEMENTED]
 
 .TP 
 .I DNSOverride (string)
@@ -338,7 +351,7 @@ will be checked. [PeerList NOT IMPLEMENTED - included for reference only]
 .TP
 .I PidFile (string)
 Specifies the path to a file that should be created at process start
-containing the process ID.
+containing the process ID.  If not specified, no such file will be created.
 
 .TP
 .I Selector (string)
@@ -352,7 +365,7 @@ parameter below for more information.
 
 This parameter is ignored if a
 .I KeyTable
-is defined. [KeyTable NOT IMPLEMENTED]
+is defined.
 
 .TP
 .I SelectorEd25519 (string)
@@ -366,7 +379,33 @@ parameter below for more information.
 
 This parameter is ignored if a
 .I KeyTableEd25519
-is defined. [KeyTable NOT IMPLEMENTED]
+is defined.
+
+.TP
+.I SigningTable (dataset)
+
+Defines a table used to select one or more signatures to apply to a message based on the address found in the From: header field. Keys in this table vary depending on the type of table used; values in this data set should include one field that contains a name found in the KeyTable (see above) that identifies which key should be used in generating the signature, and an optional second field naming the signer of the message that will be included in the "i=" tag in the generated signature. Note that the "i=" value will not be included in the signature if it conflicts with the signing domain (the "d=" value).
+
+If the first field contains only a "%" character, it will be replaced by the domain found in the From: header field. Similarly, within the optional second field, any "%" character will be replaced by the domain found in the From: header field.
+
+If this table specifies a regular expression file ("refile"), then the keys are wildcard patterns that are matched against the address found in the From: header field. Entries are checked in the order in which they appear in the file. ["refile support not implemented"].
+
+For all other database types, the full user@host is checked first, then simply host, then user@.domain (with all superdomains checked in sequence, so "foo.example.com" would first check "user@foo.example.com", then "user@.example.com", then "user@.com"), then .domain, then user@*, and finally *.
+
+In any case, only the first match is applied.
+
+.TP
+.I SigningTableEd25519 (dataset)
+
+Defines a table used to select one or more signatures to apply to a message based on the address found in the From: header field. Keys in this table vary depending on the type of table used; values in this data set should include one field that contains a name found in the KeyTable (see above) that identifies which key should be used in generating the signature, and an optional second field naming the signer of the message that will be included in the "i=" tag in the generated signature. Note that the "i=" value will not be included in the signature if it conflicts with the signing domain (the "d=" value).
+
+If the first field contains only a "%" character, it will be replaced by the domain found in the From: header field. Similarly, within the optional second field, any "%" character will be replaced by the domain found in the From: header field.
+
+If this table specifies a regular expression file ("refile"), then the keys are wildcard patterns that are matched against the address found in the From: header field. Entries are checked in the order in which they appear in the file. ["refile support not implemented"].
+
+For all other database types, the full user@host is checked first, then simply host, then user@.domain (with all superdomains checked in sequence, so "foo.example.com" would first check "user@foo.example.com", then "user@.example.com", then "user@.com"), then .domain, then user@*, and finally *.
+
+In any case, only the first match is applied.
 
 .TP
 .I Socket (string)
@@ -391,6 +430,12 @@ is not given as either a hostname or an IP address, the socket will be
 listening on all interfaces.  A literal IP address must be enclosed in
 square brackets.  This option is mandatory in the configuration file.
 
+.TP
+.I SubDomains (Boolean)
+Sign subdomains of those listed by the
+.I Domain
+parameter as well as the actual domains.
+
 .TP
 .I Syslog (Boolean)
 Log via calls to

setup.py

@@ -1,7 +1,7 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 # dkimpy-milter: A DKIM signing/verification Milter application
 # Author: Scott Kitterman <scott@kitterman.com>
-# Copyright 2018 Scott Kitterman
+# Copyright 2018,2019 Scott Kitterman
 """    This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
@@ -24,13 +24,13 @@ description = "Domain Keys Identified Mail (DKIM) signing/verifying milter for P
 kw = {}  # Work-around for lack of 'or' requires in setuptools.
 try:
     import dns
-    kw['install_requires'] = ['dkimpy>=0.7', 'pymilter', 'authres>=1.1.0', 'PyNaCl', 'ipaddress', 'dnspython']
+    kw['install_requires'] = ['dkimpy>=0.7', 'pymilter', 'authres>=1.1.0', 'PyNaCl', 'dnspython']
 except ImportError:  # If PyDNS is not installed, prefer dnspython
-    kw['install_requires'] = ['dkimpy>=0.7', 'pymilter', 'authres>=1.1.0', 'PyNaCl', 'ipaddress', 'PyDNS']
+    kw['install_requires'] = ['dkimpy>=0.7', 'pymilter', 'authres>=1.1.0', 'PyNaCl', 'Py3DNS']
 
 setup(
     name='dkimpy-milter',
-    version='1.0.1',
+    version='1.1.4',
     author='Scott Kitterman',
     author_email='scott@kitterman.com',
     url='https://launchpad.net/dkimpy-milter',
@@ -43,7 +43,7 @@ setup(
         'License :: OSI Approved :: GNU General Public License (GPL)',
         'Natural Language :: English',
         'Operating System :: POSIX',
-        'Programming Language :: Python :: 2 :: Only',
+        'Programming Language :: Python :: 3 :: Only',
         'Topic :: Communications :: Email :: Mail Transport Agents',
         'Topic :: Communications :: Email :: Filters',
         'Topic :: Security',

system/dkimpy-milter

@@ -20,9 +20,9 @@
 ### END INIT INFO
 prefix="/usr/local"
 exec_prefix=${prefix}
-sysconfdir="/etc/dkimpy-milter"
+sysconfdir="/usr/local/etc"
 bindir="${exec_prefix}/bin/"
-RUNDIR="/var/run/dkimpy-milter"
+RUNDIR="/run/dkimpy-milter"
 DAEMON=${bindir}/dkimpy-milter
 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:
 NAME=dkimpy-milter
@@ -67,14 +67,14 @@ case "$1" in
 			fi
 		fi
 	fi
-
+        start-stop-daemon --start --background --quiet --pidfile \
-        start-stop-daemon --start --quiet --pidfile $RUNDIR/$NAME.pid --startas \
+                $RUNDIR/$NAME.pid --exec $DAEMON $sysconfdir/$NAME.conf
-                $DAEMON $sysconfdir/$NAME.conf --name $NAME --test > /dev/null \
 	echo "$NAME."
 	;;
   stop)
 	echo -n "Stopping $DESC: "
 	if [ -f $RUNDIR/$NAME.pid ]; then
+		chown root:root $RUNDIR/$NAME.pid
 		start-stop-daemon --stop --pidfile $RUNDIR/$NAME.pid 
 		rm $RUNDIR/$NAME.pid
 		#echo $SOCKET
@@ -87,6 +87,7 @@ case "$1" in
   force-reload)
         echo -n "Force reloading $DESC: "
         if [ -f $RUNDIR/$NAME.pid ]; then
+                chown root:root $RUNDIR/$NAME.pid
                 start-stop-daemon --stop --pidfile $RUNDIR/$NAME.pid
                 rm $RUNDIR/$NAME.pid
                 #echo $SOCKET
@@ -95,7 +96,7 @@ case "$1" in
                 fi
         fi
         sleep 1
-        start-stop-daemon --start --chuid $USER --background --quiet --pidfile \
+        start-stop-daemon --start --background --quiet --pidfile \
                 $RUNDIR/$NAME.pid --exec $DAEMON $sysconfdir/$NAME.conf
         echo "$NAME."
         ;;
@@ -103,6 +104,7 @@ case "$1" in
         echo "Restarting $DESC: "
         echo -n "Stopping $DESC: "
         if [ -f $RUNDIR/$NAME.pid ]; then
+                chown root:root $RUNDIR/$NAME.pid
                 start-stop-daemon --stop --pidfile $RUNDIR/$NAME.pid
                 rm $RUNDIR/$NAME.pid
                 #echo $SOCKET
@@ -113,7 +115,7 @@ case "$1" in
         echo "$NAME."
 	sleep 1
         echo -n "Starting $DESC: "
-        start-stop-daemon --start --chuid $USER --background --quiet --pidfile \
+        start-stop-daemon --start --background --quiet --pidfile \
                 $RUNDIR/$NAME.pid --exec $DAEMON $sysconfdir/$NAME.conf
         echo "$NAME."
 	;;

system/dkimpy-milter.service

@@ -5,7 +5,7 @@ After=network.target
 
 [Service]
 Type=simple
-PIDFile=/var/run/dkimpy-milter/dkimpy-milter.pid
+PIDFile=/run/dkimpy-milter/dkimpy-milter.pid
 ExecStart=/usr/local/bin/dkimpy-milter /usr/local/etc/dkimpy-milter.conf 
 
 [Install]

system/socket-activation/README.md

@@ -0,0 +1,32 @@
+This directory contains example systemd unit files for running a
+supervised, socket-activated instance of dkimpy-milter.
+
+There are several advantages of using socket activation:
+
+- dkimpy-milter never runs with elevated privileges, they are dropped
+  before any dkimpy-milter code is executed.
+   
+- The socket is opened before dkimpy-milter runs.  This means that
+  clients can connect() to the socket immediately.  So even if there
+  is a delay in dkimpy-milter startup, or in libmilter itself, the
+  connection will not fail.
+  
+- You can set the privileges of a listening Unix-domain socket by an
+  override of ListenGroup= in dkimpy-milter.socket (see
+  systemd.unit(5) for how to override).  This lets you control who has
+  access to the daemon with finer granularity than is available with
+  dkimpy-milter on its own.
+  
+- dkimpy-milter will not consume system resources if it is not used.
+
+- A fully-supervised dkimpy-milter needs no PIDFile, UMask, UserID, or
+  Socket configuation.  This eliminates common race conditions and
+  startup failures, and simplifies the resulting configuration file.
+  
+There is one downside to using socket activation:
+
+- it will only work on systems where libmilter can support connection
+  strings like "fd:3".  This has been supported on Debian and derived
+  systems since sendmail 8.14.4-6 (before Debian Jessie, in early
+  2014), see for example:
+  https://sources.debian.org/src/sendmail/8.15.2-8/debian/patches/socket_activation.patch/

system/socket-activation/dkimpy-milter.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=DKIMpy Milter
+Documentation=man:dkimpy-milter(8) man:dkimpy-milter.conf(5)
+Requires=dkimpy-milter.socket
+
+[Service]
+ExecStart=/usr/bin/dkimpy-milter /etc/dkimpy-milter.conf
+User=dkimpy-milter
+
+[Install]
+Also=dkimpy-milter.socket

system/socket-activation/dkimpy-milter.socket

@@ -0,0 +1,12 @@
+[Unit]
+Description=DKIMpy Milter socket
+Documentation=man:dkimpy-milter(8) man:dkimpy-milter.conf(5)
+
+[Socket]
+ListenStream=/run/dkimpy-milter/dkimpy-milter.sock
+SocketMode=0660
+# override SocketGroup to grant access to members of another system group:
+SocketGroup=dkimpy-milter
+
+[Install]
+WantedBy=sockets.target

tests/dkimpy-milter

@@ -1,2 +1,2 @@
 #!/bin/sh
-python2 -m dkimpy_milter "$@"
+python3 -m dkimpy_milter "$@"